Creality Official “Sprite” Extruder Pro-Kit, Suitable for Ender 3/3 Pro/ 3 V2/ 3 Max/ 3 S1, Satisfy Near-end Printing and High-temperature Printing

Product Information

I recently got the new Sprite Extruder Pro kit (all metal hot end) for the Ender 3 V2. I was already running Jyers UI 5X5 mesh version with a CR touch and everything worked fine.

Sprite Extruder - 3DJake International Creality Sprite Extruder - 3DJake International

The use of gears with a gear ratio of 3.5:1, which perfectly matches the motor, enables an extrusion force of up to 80N (depending on the filament) and more precise control of filament retraction. The build process will start and when finished, the firmware will be ready to install. For the Creality Ender 3 S1, we need to install it from the SD card. Ender 3 with STM32F401 chipThis design is generally effective, however there are a number of issues you can encounter after prolonged use: Read that as {X, Y, Z}. My probe is about 30mm to the front and 40mm to the left. Suppose you read the documentation like a nerd. You'll probably want to adjust the Z offset within the printer menu instead of the firmware.

Creality Sprite Pro Extruder - 3DJake UK

Even though the manual assumes you are running an Ender 3, the information is a lot more helpful compared to getting no information, like with the Artillery All-Metal Extruder. The Sprite extruder-only upgrade requires a different e-step value, which is a setting that controls how far the printer needs to turn the extruder motor to extrude a certain amount of filament. You can configure the e-steps for the Sprite extruder using this process:Please ensure that Relative Extrusion is enabled when importing the profile. In some cases, IdeaMakerdoes not import the profile correctly. This is under Printer Settings -> Advanced -> Relative Extrusion Wrapping up